‰  NOW 13 WPM  ‰  TEXT IS FROM APRIL 2018 QST PAGE 61  ‰

THE COVER, REPOSITIONING A JUMPER, AND THEN REASSEMBLING.  I DRILLED A
SUITABLE HOLE ON THE REAR PANEL ABOVE THE OUTPUT SOCKET, AND MOUNTED AN
SPDT MINIATURE SWITCH IN THE HOLE.  THIN WIRES WERE SOLDERED BETWEEN THE
PINS AND APPROPRIATE SWITCH CONTACTS SEE FIGURE 5.  NOW CHANGING BETWEEN
THE TWO TYPES OF KEYING IS AS EASY AS FLIPPING A SWITCH.  PLEASE NOTE,
HOWEVER, THAT MAKING THESE MODIFICATIONS WILL VOID YOUR WARRANTY.  I FIND
THAT I USE THIS DEVICE MUCH MORE OFTEN AFTER MAKING THESE SMALL
ƒ  QST DE W1AW  ‰
MODIFICATIONS.  RADIAL RING FOR THE CLAW THE CLAW MOUNT FOR ANTENNAS
QUICKLY MOUNTS A MONOPOLE TO A FENCE, PICNIC TABLE, OR OTHER STURDY OBJECT.
HOWEVER, THE SIZE AND POSITION OF THE SINGLE, NUT BOLT ARRANGEMENT FOR
ATTACHING RADIALS/RF GROUND ARE FAR FROM IDEAL.  THE BOLT IS SMALL AND VERY
CLOSE TO THE 3/8 INCH ANTENNA MOUNT, LEAVING VIRTUALLY NO ROOM FOR
CONNECTORS AND WIRES.  MY SOLUTION WAS TO ATTACH A RADIAL RING MADE OF A
‰  END OF 13 WPM TEXT  ‰  QST DE W1AW  ƒ