‰  NOW 30 WPM  ‰  TEXT IS FROM FEBRUARY 2017 QST  PAGE 44‰

TO THE SPEAKER HOOKUP DIAGRAM SEEN IN FIGURE 2.  WHEN VIEWING THE SPEAKER
CAVITY FROM THE BOTTOM, THE LEFT RCA PHONO JACK IS THE AUDIO IN, AND WITH
THE SWITCH LEVER ORIENTED TO THE RIGHT, WILL BE THE CW SPEAKERS ON
POSITION.  THE OTHER SWITCH DIRECTION WILL BE THE BYPASS POSITION.  NOW
STUFF THE COTTON BALLS, 8, IN AND AROUND THE SPEAKER EDGES AND BOTTOM OF
THE SPEAKER.  DO NOT OVERSTUFF TO WHERE IT WILL CREATE A BULGE IN THE
BOTTOM COVER.  WITH THE SPEAKER CAVITY IN THE SAME POSITION, APPLY A SMALL
BEAD OF GLUE, 9, AROUND THE BOTTOM EDGE OF THE SPEAKER CAVITY, WHICH AT
THIS TIME SHOULD BE FACING UP.  PLACE THE 2 3/8 INCH COVER DISK, 10, TO THE
BOTTOM EDGE OF THE SPEAKER CAVITY.  PVC STREET ELBOW MODIFICATION RESONATOR
USE THE FINISHED SPEAKER CAVITY AS A GUIDE TO ADD CLEARANCE NOTCHES FOR THE
SWITCH AND RCA JACKS TO THE PVC STREET ELBOW SEE THE LEAD PHOTO.  ADD
ENOUGH DEPTH TO THE NOTCHES SO THERES ABOUT 3/16 TO 1/8 OF AN INCH OF THE
SPEAKER CAVITY EXPOSED AT THE BOTTOM OF THE ELBOW.  I USED A DREMEL TOOL
WITH A SMALL CIRCULAR SANDING WHEEL NOT A DISK.  SET THIS ASIDE FOR THE
MOMENT.  FINAL ASSEMBLY  ATTACH AN RCA JUMPER CABLE TO THE CW SPEAKER AUDIO
‰  END OF 30 WPM TEXT  ‰  QST DE W1AW  ƒ