=  NOW 35 WPM  =  TEXT IS FROM JUNE 2022 QST  PAGE 48 =

SOFTWARE UPDATE IT IS STRONGLY RECOMMENDED TO UPDATE YOUR DVMEGA CAST
BEFORE CONFIGURING THE UNIT.  INDEED, IF YOU COMPLETE THE CONFIGURATION AND
THEN PERFORM AN UPDATE, YOU WILL LOSE ALL THE CONFIGURATIONS AND NEED TO
START OVER.  THE CURRENT VERSION CAN BE VIEWED IN THE SAME SCREEN AS THE
ONE SHOWING THE IP ADDRESS IN FIGURE 5.  I THEREFORE STRONGLY SUGGEST THAT
YOU CHECK FOR AN UPDATE ON THE MANUFACTURERS WEBSITE AT WWW. DVMEGA.
NL/UPDATE AND COMPARE WITH YOUR CURRENT VERSION.  I HAD A REGISTRATION CARD
IN THE BOX WITH THE RADIO, BUT THE SAME INFORMATION CAN BE FOUND ON THE
REAR PANEL OF THE UNIT SEE FIGURE 6.  YOU WILL NEED THESE DETAILS TO
REGISTER THE DEVICE ON THE MANUFACTURERS WEBSITE TO OBTAIN THE UPDATES.
ITS IMPORTANT TO NOTE THAT UPDATES ARE FREE OF CHARGE.  THE UPDATE PROCESS
IS WELL EXPLAINED IN THE DOCUMENTATION ON THE WEBSITE, BUT THE USER NEEDS
TO BE COMFORTABLE WITH COMPUTERS BECAUSE THE PROCESS REQUIRES THE
MANIPULATION OF FILES, INSTALLATION OF SOFTWARE, AND THE USE OF PERIPHERALS
TO READ AND WRITE TO THE MICROSD CARD.  THE UPDATE IS IN THREE STEPS THE
OPERATING SYSTEM, FOLLOWED BY THE UPDATE OF THE MOTHERBOARD, AND FINISHING
WITH THE DISPLAY.  THE UPDATE OF THE OPERATING SYSTEM MUST BE DONE WITH THE
INCLUDED MICROSD CARD LOCATED INSIDE THE DVMEGA CAST, BECAUSE ITS THE
NANOPI COMPUTER OPERATING SYSTEM.  TO DO THIS, YOU MUST FIRST OPEN THE
=  END OF 35 WPM TEXT  =  QST DE W1AW  <